| ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | 9.0 CENTIMETER-GRAMS MAXIMUM |
| ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | 5.0 CENTIMETER-GRAMS MAXIMUM |
| BODY MATERIAL | STEEL, STAINLESS |
| BODY SIZE | 8 |
| BODY STYLE | STANDARD ROUND A |
| COMPENSATION METHOD | WINDING COMPENSATED |
| COMPENSATOR TRANSFORMATION RATIO IN PERCENT | 0.980 ROTOR TO COMPENSATOR NOMINAL |
| FLANGE DIAMETER | 0.7490 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM |
| FLANGE THICKNESS | 0.0620 INCHES NOMINAL |
| FREQUENCY IN HERTZ | 400.0 NOMINAL |
| OUTPUT VOLTAGE FUNCTIONAL ERROR RANGE IN PERCENT | -0.1 TO 0.1 |
| OVERALL LENGTH | 1.9400 INCHES MAXIMUM |
| MAXIMUM TEMP RISE | 15.0 CELSIUS |
| MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 12.00 |
| MOUNTING SURFACE TO TERMINAL END DISTANCE | 1.3000 INCHES MAXIMUM |
| PILOT DIAMETER | 0.4995 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM |
| PILOT LENGTH | 0.0380 INCHES MINIMUM AND 0.0430 INCHES MAXIMUM |
| PHASE SHIFT ANGLE IN DEG | 16.000 INPUT TO OUTPUT NOMINAL |
| PLUS J ZRO REACTANCE IN OHMS | 880.00 NOMINAL |
| PLUS J ZSO REACTANCE IN OHMS | 760.00 NOMINAL |
| SHAFT DIAMETER | 0.1195 INCHES MINIMUM AND 0.1200 INCHES MAXIMUM SINGLE SHAFT |
| SHAFT SLOT DEPTH | 0.0300 INCHES NOMINAL SINGLE SHAFT |
| SHAFT SLOT WIDTH | 0.0250 INCHES NOMINAL SINGLE SHAFT |
| SHAFT TYPE | ROUND, SLOTTED SINGLE SHAFT |
| SHAFT LENGTH | 0.4910 INCHES MINIMUM AND 0.6400 INCHES MAXIMUM SINGLE SHAFT |
| STATOR INPUT CURRENT RATING | 15.0 MILLIAMPERES MAXIMUM |
| STATOR INPUT ELECTRICAL POWER RATING | 25.0 MILLIWATTS NOMINAL |
| STATOR INPUT VOLTAGE RATING IN VOLTS | 0.1 MINIMUM AND 10.0 MAXIMUM |
| ZCO IMPEDANCE MAGNITUDE IN OHMS | 460.00 NOMINAL |
| ZCO IMPEDANCE ANGLE IN DEG | 832.00 NOMINAL |
| ZRO RESISTANCE IN OHMS | 310.00 NOMINAL |
| ZSO RESISTANCE IN OHMS | 246.00 NOMINAL |
| TERMINAL LOCATION | REAR |
| TERMINAL TYPE AND QUANTITY | 12 WIRE LEAD |
| TRANSFORMATION RATIO EQUALITY IN PERCENT | 0.2 NOMINAL |
| TRANSFORMATION RATIO | 1.000 ROTOR TO STATOR NOMINAL |
| UNDERCUT DIAMETER | 0.6880 INCHES MINIMUM AND 0.6910 INCHES MAXIMUM |
| UNDERCUT WIDTH | 0.0620 INCHES NOMINAL |