| FREQUENCY IN HERTZ | 400.0 NOMINAL |
| TERMINAL TYPE AND QUANTITY | 12 WIRE LEAD |
| BODY STYLE | STANDARD ROUND A |
| BODY SIZE | 11 |
| STATOR INPUT VOLTAGE RATING IN VOLTS | 26.0 NOMINAL |
| STATOR INPUT CURRENT RATING | 4.0 MILLIAMPERES NOMINAL |
| STATOR INPUT ELECTRICAL POWER RATING | 10.0 MILLIWATTS NOMINAL |
| ZRO RESISTANCE IN OHMS | 400.00 NOMINAL |
| PLUS J ZRO REACTANCE IN OHMS | 2325.00 NOMINAL |
| ZSO RESISTANCE IN OHMS | 380.00 NOMINAL |
| PLUS J ZSO REACTANCE IN OHMS | 2200.00 NOMINAL |
| TRANSFORMATION RATIO | 0.980 ROTOR TO STATOR NOMINAL |
| COMPENSATION METHOD | WINDING COMPENSATED |
| COMPENSATOR TRANSFORMATION RATIO IN PERCENT | 0.990 ROTOR TO COMPENSATOR NOMINAL |
| PHASE SHIFT ANGLE IN DEG | 7.500 INPUT TO OUTPUT NOMINAL |
| MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 10.00 |
| OUTPUT VOLTAGE FUNCTIONAL ERROR RANGE IN PERCENT | -0.1 TO 0.0 |
| ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | 4.0 CENTIMETER-GRAMS NOMINAL |
| PILOT DIAMETER | 0.4995 INCHES MINIMUM AND |
| 0.5000 INCHES MAXIMUM |
| OVERALL LENGTH | 1.7310 INCHES MINIMUM AND |
| 1.7550 INCHES MAXIMUM |
| FLANGE DIAMETER | 0.7490 INCHES MINIMUM AND |
| 0.7500 INCHES MAXIMUM |
| FLANGE THICKNESS | 0.0620 INCHES NOMINAL |
| UNDERCUT DIAMETER | 0.6880 INCHES MINIMUM AND |
| 0.6910 INCHES MAXIMUM |
| UNDERCUT WIDTH | 0.0620 INCHES NOMINAL |
| PILOT LENGTH | 0.0380 INCHES MINIMUM AND |
| 0.0430 INCHES MAXIMUM |
| MOUNTING SURFACE TO TERMINAL END DISTANCE | 1.2400 INCHES MAXIMUM |
| SHAFT TYPE | ROUND, SLOTTED SINGLE SHAFT |
| SHAFT DIAMETER | 0.1195 INCHES MINIMUM AND |
| 0.1200 INCHES MAXIMUM SINGLE SHAFT |
| SHAFT LENGTH | 0.4910 INCHES MINIMUM AND |
| 0.5150 INCHES MAXIMUM SINGLE SHAFT |
| SHAFT SLOT DEPTH | 0.0300 INCHES NOMINAL SINGLE SHAFT |
| SHAFT SLOT WIDTH | 0.0250 INCHES NOMINAL SINGLE SHAFT |
| TERMINAL LOCATION | REAR |
| BODY MATERIAL | STEEL, CORROSION RESISTING |