| BODY MATERIAL | STEEL, CORROSION RESISTING |
| BODY SIZE | 10 |
| BODY STYLE | STANDARD ROUND A |
| FLANGE DIAMETER | 0.9370 INCHES NOMINAL |
| FLANGE THICKNESS | 0.0620 INCHES NOMINAL |
| FREQUENCY IN HERTZ | 400.0 NOMINAL |
| MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | 1.00 INPUT |
| III FRAGILITY FACTOR | MODERATELY RUGGED |
| III SHAFT END PLAY | 0.0060 INCHES MAXIMUM |
| PILOT DIAMETER | 0.6875 INCHES NOMINAL |
| PHASE SHIFT ANGLE IN DEG | 7.000 INPUT TO OUTPUT MAXIMUM |
| PILOT LENGTH | 0.0380 INCHES NOMINAL |
| PLUS J ZSO REACTANCE IN OHMS | 775.00 NOMINAL |
| PROPRIETARY CHARACTERISTICS | PACS |
| MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 42.00 |
| MOUNTING SURFACE TO TERMINAL END DISTANCE | 2.6090 INCHES MAXIMUM |
| OVERALL LENGTH | 3.8450 INCHES MAXIMUM |
| ROTOR DC RESISTANCE IN OHMS | 96.00 NOMINAL |
| SHAFT DIAMETER | 0.0934 INCHES NOMINAL SINGLE SHAFT |
| SHAFT LENGTH | 0.8130 INCHES MINIMUM SINGLE SHAFT AND 0.8230 INCHES MAXIMUM SINGLE SHAFT |
| SHAFT MAXIMUM RUNOUT | 0.0010 INCHES |
| SHAFT TYPE | ROUND SINGLE SHAFT |
| SPECIAL FEATURES | CLUTCH OPERATED |
| ZSO RESISTANCE IN OHMS | 95.00 NOMINAL |
| STATOR INPUT VOLTAGE RATING IN VOLTS | 26.0 NOMINAL |
| STATOR DC RESISTANCE IN OHMS | 64.00 NOMINAL |
| TERMINAL LOCATION | SIDE |
| TERMINAL TYPE AND QUANTITY | 6 WIRE LEAD |
| TRANSFORMATION RATIO | 0.404 ROTOR TO STATOR NOMINAL |
| UNDERCUT DIAMETER | 0.8370 INCHES NOMINAL |
| UNDERCUT WIDTH | 0.0620 INCHES NOMINAL |