5990-00-132-2680, RESOLVER,ELECTRICAL,LINEAR

National Stock Number:
5990-00-132-2680

Federal Supply Class:
5990

National Item Identification Number:
001322680

Description:
RESOLVER,ELECTRICAL,LINEAR

Detail:
AN ITEM CONSISTING OF A STATOR AND ROTOR INDUCTIVELY COUPLED WHICH PROVIDES ACCURATE LINEAR INDICATION OF SHAFT ROTATION ABOUT A REFERENCE POSITION IN THE FORM OF A POLARIZED VOLTAGE WHOSE MAGNITUDE IS PROPORTIONAL TO ANGULAR DISPLACEMENT AND PHASE RELATIONSHIP INDICATES DIRECTION OF SHAFT ROTATION. ITS WINDINGS AND SLOTS ARE NOT UNIFORMLY DISTRIBUTED, BUT INSTEAD ARE DELIBERATELY MODIFIED TO PRODUCE A LINEAR OUTPUT WHICH IS USUALLY LIMITED TO LESS THAN PLUS OR MINUS 90 DEGREES OF EFFECTIVE ELECTRICAL TRAVEL. NORMALLY IT HAS ONLY ONE ENERGIZATION WINDING AND ONE OUTPUT WINDING. SEE ALSO RESOLVER, ELECTRICAL.

Manufacturer Information:

229-6025-010	13499	ROCKWELL COLLINS, INC.
ESDH11AU6	99932	MOOG INC.

Techincal Specification:

BODY SIZE	11
ROTOR INPUT VOLTAGE RATING IN VOLTS	57.0 NOMINAL
ROTOR INPUT CURRENT RATING	17.6 MILLIAMPERES NOMINAL
ROTOR INPUT ELECTRICAL POWER RATING	268.0 MILLIWATTS NOMINAL
FREQUENCY IN HERTZ	400.0 NOMINAL
ZRO RESISTANCE IN OHMS	866.00 NOMINAL
PLUS J ZRO REACTANCE IN OHMS	3120.00 NOMINAL
ZSO RESISTANCE IN OHMS	1100.00 NOMINAL
PLUS J ZSO REACTANCE IN OHMS	5240.00 NOMINAL
ROTOR DC RESISTANCE IN OHMS	450.00 NOMINAL
STATOR DC RESISTANCE IN OHMS	510.00 NOMINAL
PHASE SHIFT ANGLE IN DEG	7.500 INPUT TO OUTPUT NOMINAL
MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT	90.00 OUTPUT
ELECTRICAL ERROR ANGULAR RANGE IN MINUTES	-7.0 TO 7.0
ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS	9.0 CENTIMETER-GRAMS NOMINAL
ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS	3.0 CENTIMETER-GRAMS NOMINAL
BODY STYLE	STANDARD ROUND B
SHOULDER DIAMETER	0.9750 INCHES NOMINAL
PILOT DIAMETER	0.6250 INCHES NOMINAL
OVERALL LENGTH	2.8510 INCHES MAXIMUM
FLANGE DIAMETER	1.0620 INCHES NOMINAL
FLANGE THICKNESS	0.0930 INCHES NOMINAL
UNDERCUT WIDTH	0.0500 INCHES NOMINAL
PILOT LENGTH	0.0620 INCHES NOMINAL
SHOULDER LENGTH	0.0620 INCHES NOMINAL
MOUNTING SURFACE TO TERMINAL END DISTANCE	1.7730 INCHES MAXIMUM
ALIGNMENT HOLE DEPTH	0.0700 INCHES MAXIMUM
ALIGNMENT HOLE BOLT CIRCLE DIAMETER	0.8120 INCHES NOMINAL
ALIGNMENT HOLE QUANTITY	4
SHAFT TYPE	ROUND, SLOTTED SINGLE SHAFT
SHAFT DIAMETER	0.1200 INCHES NOMINAL SINGLE SHAFT
SHAFT LENGTH	1.0000 INCHES NOMINAL SINGLE SHAFT
SHAFT SLOT DEPTH	0.0320 INCHES NOMINAL SINGLE SHAFT
SHAFT SLOT WIDTH	0.0320 INCHES NOMINAL SINGLE SHAFT
TERMINAL TYPE AND QUANTITY	6 TAB W/SCREW
TERMINAL LOCATION	REAR

Click here to Register for Free 30-day Trial