| DUTY CYCLE | INTERMITTENT |
| ENCLOSURE FEATURE | EXPLOSION PROOF |
| CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | 26.0 LINE TO NEUTRAL SINGLE INPUT |
| COOLING METHOD | AMBIENT AIR |
| CURRENT RATING IN AMPS | 5.000 SINGLE INPUT |
| CURRENT RATING METHOD | LOAD |
| FEATURES PROVIDED | ELECTRIC NOISE SUPPRESSOR AND HORIZONTAL MOUNTING POSITION AND VERTICAL MOUNTING POSITION |
| FRAME SIZE DESIGNATION | 15 |
| INCLOSURE SPECIFICATION | MIL-STD-108 |
| LENGTH OF SHAFT FROM HOUSING | 0.187 INCHES SINGLE END |
| OVERALL HEIGHT | 2.260 INCHES |
| OVERALL LENGTH | 3.120 INCHES |
| OVERALL WIDTH | 1.600 INCHES |
| MOUNTING FACILITY TYPE AND QUANTITY | 4 UNTHREADED HOLE |
| MOUNTING METHOD | PAD |
| NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT | 1.282 INCHES |
| NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | 1.282 INCHES |
| ROTOR SPEED RATING IN RPM | 16000.0 SINGLE FULL LOAD |
| SHAFT END CHARACTERISTIC | A14 SINGLE STYLE SINGLE END |
| SHAFT DIAMETER | 0.170 INCHES NOMINAL SINGLE END |
| SHAFT ROTATION DIRECTION | CLOCKWISE OR COUNTERCLOCKWISE SINGLE END |
| SPLINE QUANTITY | 8 SINGLE END |
| SPLINE LENGTH | 0.187 INCHES NOMINAL SINGLE END |
| SPLINE MINOR DIAMETER | 0.176 INCHES MINIMUM AND 0.177 INCHES MAXIMUM SINGLE END |
| WINDING TYPE | SERIES WOUND |
| TEMP RATING | -65.0 OPERATING FAHRENHEIT AND 250.0 OPERATING FAHRENHEIT |
| TERMINAL TYPE AND QUANTITY | 2 WIRE LEAD |
| TIME INTERVAL | 3.0 MINUTES MAXIMUM ON AND 17.0 MINUTES MINIMUM OFF |
| TORQUE RATING AND TYPE | 1.5 INCH-OUNCES STALLED |