| DUTY CYCLE | CONTINUOUS |
| ENCLOSURE FEATURE | SPRAY TIGHT |
| CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | 440.0 LINE TO NEUTRAL SINGLE INPUT |
| COOLING METHOD | FAN COOLED |
| FEATURES PROVIDED | HORIZONTAL MOUNTING POSITION |
| FREQUENCY IN HERTZ | 60.0 INPUT |
| INCLOSURE SPECIFICATION | MIL-STD-108 |
| LENGTH OF SHAFT FROM HOUSING | 5.750 INCHES SINGLE END |
| OVERALL HEIGHT | 21.125 INCHES |
| OVERALL LENGTH | 32.938 INCHES |
| OVERALL WIDTH | 22.250 INCHES |
| MOUNTING FACILITY TYPE AND QUANTITY | 4 UNTHREADED HOLE |
| MOUNTING METHOD | FIXED BASE |
| NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | 20.000 INCHES |
| NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | 12.250 INCHES |
| PHASE | THREE INPUT |
| POWER RATING | 40.0000 HORSEPOWER OUTPUT |
| ROTOR SPEED RATING IN RPM | 1180.0 SINGLE FULL LOAD |
| SHAFT DIAMETER | 2.0620 INCHES NOMINAL SINGLE END |
| SHAFT END CHARACTERISTIC | A14 FIRST STYLE AND A12 SECOND STYLE SINGLE END |
| SHAFT CENTER TO MOUNTING SURFACE DISTANCE | 8.875 INCHES SINGLE END |
| SHAFT ROTATION DIRECTION | CLOCKWISE OR COUNTERCLOCKWISE SINGLE END |
| SPLINE LENGTH | 2.0000 INCHES NOMINAL SINGLE END |
| SPLINE MINOR DIAMETER | 1.8885 INCHES NOMINAL SINGLE END |
| SPLINE QUANTITY | 31 SINGLE END |
| WINDING TYPE | INDUCTION-SQUIRREL CAGE |
| STEP DIAMETER | 1.9900 INCHES NOMINAL SINGLE END |
| STEP LENGTH | 2.6250 INCHES NOMINAL SINGLE END |
| TEMP RATING | 60.0 OPERATING CELSIUS |
| TERMINAL TYPE AND QUANTITY | 3 THREADED STUD |
| TEST DATA DOCUMENT | 10001-2481356 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |