| ACCURACY IN PERCENT | -3.0 TO 3.0 AT FULL SCALE SINGLE INDICATOR SINGLE RANGE |
| BACKGROUND COLOR | WHITE SINGLE INDICATOR SINGLE RANGE |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | 1.810 INCHES NOMINAL |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | 1.810 INCHES NOMINAL |
| CIRCUIT ATTACHMENT METHOD AND QUANTITY | 2 SOLDER LUG AND 2 SOLDER STUD |
| CIRCUIT CURRENT FOR WHICH DESIGNED | DC |
| DIAL SCALE MARKING COLOR | BLACK SINGLE INDICATOR SINGLE RANGE |
| DIELECTRIC WITHSTANDING VOLTAGE IN VOLTS | 1500.0 |
| FURNISHED ITEMS AND QUANTITY | NUT 4; LOCKWASHER 4; GASKET 1 |
| ENVIRONMENTAL PROTECTION | AIRTIGHT AND COLD RESISTANT AND HEAT RESISTANT AND HUMIDITY RESISTANT AND SALT SPRAY RESISTANT AND SHOCK RESISTANT AND VIBRATION RESISTANT AND WATERTIGHT |
| FSC APPLICATION DATA | TEST SET,ELECT. EQUIP. |
| INDICATOR TYPE | DIAL W/POINTER |
| INSTALLATION DESIGN | PANEL |
| OVERALL HEIGHT | 1.810 INCHES MAXIMUM |
| OVERALL LENGTH | 1.625 INCHES MAXIMUM |
| OVERALL WIDTH | 1.810 INCHES MAXIMUM |
| MATERIAL | STEEL |
| MEASUREMENT RANGE | +0.0 TO 10.0 VOLTS, DC SINGLE INDICATOR SINGLE RANGE |
| METER BODY DIAMETER BEHIND MOUNTING FLANGE | 1.510 INCHES MAXIMUM |
| METER DEPTH BEHIND MOUNTING FLANGE | 1.000 INCHES MAXIMUM |
| MOUNTING ARRANGEMENT STYLE | FOUR HOLE/STUD RECTANGULAR/SQUARE |
| MOUNTING FACILITY TYPE AND QUANTITY | 4 SCREW AND 4 UNTHREADED HOLE |
| MOUNTING HOLE DIAMETER | 0.125 INCHES NOMINAL |
| MOVEMENT SUSPENSION METHOD | JEWEL PIVOT BASE |
| MOVEMENT TYPE | MOVING COIL, PERMANENT MAGNET |
| NUCLEAR HARDNESS CRITICAL FEATURE | NONHARDENED |
| POINTER COLOR | BLACK SINGLE INDICATOR SINGLE RANGE |
| POWER SOURCE | EXTERNAL |
| SCALE DIVISION QUANTITY | 20 SINGLE INDICATOR SINGLE RANGE |
| SCALE GRADUATION TYPE | LINEAR SINGLE INDICATOR SINGLE RANGE |
| SCALE SELECTION METHOD | TERMINAL |
| SENSITIVITY RATING | 1000.0 OHMS PER VOLT |
| SPECIFICATION/STANDARD DATA | 81349-MIL-M-10304/21 GOVERNMENT SPECIFICATION |
| SPECIAL FEATURES | RUGGEDIZED |
| STYLE DESIGNATOR | RECTANGULAR FLUSH MTG |
| SURFACE TREATMENT | PAINT |
| TEST DATA DOCUMENT | 81349-MIL-M-10304 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |