| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH | 0.031 INCHES NOMINAL |
| FIRST LEG DISTANCE BETWEEN LOWER HOLE CENTERS ALONG WIDTH | 1.919 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.310 INCHES NOMINAL |
| FIRST LEG ANGLE | 159.0 DEGREES NOMINAL |
| FIRST LEG CORNER RADIUS | 0.310 INCHES NOMINAL |
| FIRST LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG WIDTH | 0.959 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.310 INCHES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | THREE HOLES |
| FIRST LEG HOLE DIAMETER | 0.345 INCHES MINIMUM AND 0.350 INCHES MAXIMUM |
| FIRST LEG STYLE | CORNER RADIUS |
| FIRST LEG THICKNESS | 0.160 INCHES NOMINAL |
| FIRST LEG WIDTH | 2.539 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-18729 MIL SPEC SINGLE MATERIAL RESPONSE |
| MATERIAL | STEEL COMP 4130 |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.380 INCHES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG STYLE | END RADIUS AND TAPERED |
| SECOND LEG END RADIUS | 0.380 INCHES NOMINAL |
| SECOND LEG HOLE ARRANGEMENT STYLE | ONE HOLE |
| SECOND LEG HOLE DIAMETER | 0.250 INCHES NOMINAL |
| SECOND LEG LENGTH | 0.900 INCHES NOMINAL |
| SECOND LEG THICKNESS | 0.160 INCHES NOMINAL |
| SECOND LEG WIDTH | 1.300 INCHES NOMINAL |
| SPECIAL FEATURES | RIGHT HAND |
| STYLE DESIGNATOR | OFFSET ANGLE |
| SURFACE TREATMENT | PAINT |