| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.375 INCHES NOMINAL |
| FIRST LEG ANGLE | 159.0 DEGREES NOMINAL |
| FIRST LEG LENGTH | 0.900 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.375 INCHES NOMINAL |
| FIRST LEG END RADIUS | 0.375 INCHES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | ONE HOLE |
| FIRST LEG HOLE DIAMETER | 0.276 INCHES MINIMUM AND 0.286 INCHES MAXIMUM |
| FIRST LEG STYLE | END RADIUS |
| FIRST LEG THICKNESS | 0.160 INCHES NOMINAL |
| FIRST LEG WIDTH | 0.750 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6350 ASSN STD 1ST MATERIAL RESPONSE OR AMS 6355 ASSN STD 2ND MATERIAL RESPONSE |
| MATERIAL | STEEL COMP 4130 OR STEEL COMP 8630 |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.374 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.884 INCHES NOMINAL |
| SECOND LEG CORNER RADIUS | 0.281 INCHES NOMINAL |
| SECOND LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG WIDTH | 0.857 INCHES NOMINAL |
| SECOND LEG LENGTH | 1.631 INCHES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG STYLE | CORNER RADIUS |
| SECOND LEG END RADIUS | 0.380 INCHES NOMINAL |
| SECOND LEG HOLE ARRANGEMENT STYLE | THREE HOLES |
| SECOND LEG HOLE DIAMETER | 0.339 INCHES MINIMUM AND 0.349 INCHES MAXIMUM |
| SECOND LEG THICKNESS | 0.160 INCHES NOMINAL |
| SECOND LEG WIDTH | 1.300 INCHES NOMINAL |
| SPECIAL FEATURES | LEFT HAND |
| STYLE DESIGNATOR | ANGLE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | AMS 2400 ASSN STD SINGLE TREATMENT RESPONSE |
| SURFACE TREATMENT | CADMIUM |