|
|
|
National Stock Number:
5365-00-107-0236
Federal Supply Class:
5365
National Item Identification Number:
001070236
Description:
SPACER,PLATE
Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
|
Manufacturer Information:
| 537558-2 | 64547 | HONEYWELL INTERNATIONAL, INC | | 537558-2 | 70210 | HONEYWELL INTERNATIONAL INC. |
|
Techincal Specification:
| BOLT HOLE CENTERLINE TO NEAREST EDGE DISTANCE | 0.078 INCHES NOMINAL | | BOLT HOLE QUANTITY | 2 | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 0.112 INCHES MINIMUM AND 0.118 INCHES MAXIMUM | | HOLE DIAMETER | 0.066 INCHES MINIMUM AND 0.070 INCHES MAXIMUM | | OUTSIDE CORNER BEVEL LENGTH ALONG LENGTH | 0.025 INCHES MINIMUM AND 0.040 INCHES MAXIMUM | | OUTSIDE CORNER BEVEL LENGTH ALONG WIDTH | 0.025 INCHES MINIMUM AND 0.040 INCHES MAXIMUM | | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH | 0.067 INCHES NOMINAL | | OVERALL LENGTH | 0.245 INCHES MINIMUM AND 0.255 INCHES MAXIMUM | | OVERALL WIDTH | 0.155 INCHES MINIMUM AND 0.165 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5528,17-7PH,COND A ASSN STD SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL | | SPECIAL FEATURES | NOTCH CENTERED ALONG ONE LENGTH,0.035 IN. NOM DEPTH AT 90.0 DEG ANGLE. BEVELED CORNERS ON OPPOSITE SIDE |
|
|