|
|
|
National Stock Number:
5365-00-107-0237
Federal Supply Class:
5365
National Item Identification Number:
001070237
Description:
SHIM
Detail:
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST.
|
Manufacturer Information:
| 537558-1 | 64547 | HONEYWELL INTERNATIONAL, INC | | 537558-1 | 70210 | HONEYWELL INTERNATIONAL INC. |
|
Techincal Specification:
| BOLT HOLE CENTERLINE TO NEAREST EDGE DISTANCE | 0.080 INCHES NOMINAL | | BOLT HOLE QUANTITY | 2 | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 0.112 INCHES MINIMUM AND 0.118 INCHES MAXIMUM | | CONSTRUCTION | ONE-PIECE | | HOLE DIAMETER | 0.066 INCHES MINIMUM AND 0.070 INCHES MAXIMUM | | OUTSIDE CORNER BEVEL LENGTH ALONG LENGTH | 0.025 INCHES MINIMUM AND 0.040 INCHES MAXIMUM | | OUTSIDE CORNER BEVEL LENGTH ALONG WIDTH | 0.025 INCHES MINIMUM AND 0.040 INCHES MAXIMUM | | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH | 0.067 INCHES NOMINAL | | OVERALL LENGTH | 0.245 INCHES MINIMUM AND 0.255 INCHES MAXIMUM | | OVERALL WIDTH | 0.155 INCHES MINIMUM AND 0.165 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5528 ASSN STD SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP 631 | | SPECIAL FEATURES | NOTCH CENTERED ALONG ONE LENGTH,0.035 IN. NOM DEPTH AND 90 DEG NOM ANGLE.BEVELED CORNERS ONLY ON OPPOSITE LENGTH | | STYLE DESIGNATOR | NON-CIRCULAR W/O RADIUS |
|
|